Showing all 127 results
Calibration Gas
Calibration gas available in 34 & 58 liter.
North Defender Multi-Gases/Vapors/P100 Respirator Cartridges
KEY FEATURES:
- Recommended for respiratory protection against organic vapors, chlorine, hydrogen chloride, sulfur dioxide, hydrogen fluoride, chlorine dioxide, ammonia, methylamine, formaldehyde. hydrogen sulfide for escape only
- 99.97% efficient against solid or liquid particles, including oil-based particles
- Compatible with North 5400, 5500, 7600, and 7700 Series Masks
- 2 pack
North Multi-gas Cartridge
Key Features:
- Protects against organic vapors
- Sold in 2 pack
- Compatible with all North face-pieces
North P100 Respirator Cartridges
KEY FEATURES:
- For use with the North 5400 or 7600 Series full face respirators, each sold separately
- 99.97% efficient against solid or liquid particles, including oil-based particles
- 2 pack
PMI Heightec Pulsar Ascender
KEY FEATURES:
- Comfortable profiled grip
- Two lower attachment points to separate lanyard and foot loop
- One upper attachment point
- Shaped for optimum pulling position
- Features the X-cam™
PMI Heightec Twist Ascender
KEY FEATURES:
- Does not fuzz sheath when placed on and off the rope
- Easy removal for change over
- Smooth action for down climbing
- One lower and one upper attachment point
- Alloy release catch
- Essential piece of gear for Frog climbing system
- Slimline model with profiled attachment points
- Designed to sit flat on the body
- Can be used with a combination harness or a separate sit and chest harness
- Durable alloy release catch allows single handed operation
- X-Cam™ performance
PMI SMC 3″ Prusik Minding Pulley
KEY FEATURES:
- Precision machined aluminum side plates.
- Large top hole accepts 3 carabiners.
- Certification: NFPA 1983 G.
- Rope Size: 11 to 13 mm (Designed for use with 11 mm to 13 mm ropes in conjunction with 7 mm to 9 mm Prusik cords).
- MBS: 38 kN.
- Length: 5.85″ (148mm).
- Width: 4.17″ (105mm).
- Height: 1.37″ (34mm).
- Axle: Ball Bearing.
- Sheave: 3.0″ Aluminum on sealed ball bearings.
- Tread: 2.50″.
- Weight: 12.5 oz.
SMC 2″ Single PMP – NFPA (Green/Black)
KEY FEATURES:
- Precision machined aluminum side plates and 2″ sheaves
- Sealed Bearings
- Double pulleys include a becket
SMC 2″Double PMP – NFPA (Black)
KEY FEATURES:
- Precision machined aluminum side plates and 2″ sheaves
- Sealed Bearings
- Double pulleys include a becket
SMC 3″ Double PMP – NFPA (Gold)
KEY FEATURES:
- Ball bearing
- Large top hole easily accepts 3 large carabiners
- Designed for 11 mm to 13 mm ropes
- Precision machined aluminum side plates and 3″ sheaves.
- Sealed bearings
- Double pulleys include a becket
SMC JRB Double Pulley W/Becket (Blue)
KEY FEATURES:
- Nylon sheave
- Precision machined aluminum side plates
- Zinc coated axle
- Rotating side plates
- JRB becket MBS: 2,298 lbf (13 kN)
SMC Micro (1 3/8″) PMP Double – NFPA (Gold)
KEY FEATURES:
- Precision machined aluminum side plates and 1.38″ sheaves
- Sealed Ball Bearings
- Double pulleys include a becket
Delta Link 10mm Galvanised Steel Carabiner
KEY FEATURES:
- MBS: 42 kN (9525 lbf)
- WLL: 9 kN (1985 lbf)
- WEIGHT: 0 oz (153 g)
- LENGTH: 42″ (8.7 cm)
- WIDTH: 61″ (6.6 cm)
- HEIGHT: 44″ (1.0 cm)
- GATE OPENING: 15/32″ (12.0 mm)
- MAJOR AXIS: 42 kN (9525 lbf)
- MATERIAL: Galvanized Steel
Delta Link 7mm Oval Galvanised Steel
KEY FEATURES:
- MBS: 27 kN (6050 lbf)
- WLL: 5 kN (1210 lbf)
- WEIGHT: 0 oz (51 g)
- LENGTH: 61″ (6.6 cm)
- WIDTH: 25″ (3.2 cm)
- HEIGHT: 28″ (7.0 mm)
- GATE OPENING: 11/32″ (8.5 mm)
- MAJOR AXIS: 27 kN (6050 lbf)
- MATERIAL: Galvanized Steel
SMC DualGuard Auto-Lock Lite Steel Carabiner-NFPA
KEY FEATURES:
- Lite Alloy Steel Body
- Stainless Steel spring, pin, and sleeve
SMC Large Steel Lock D Carabiner – NFPA (Black)
KEY FEATURES:
- Maximum holding strength with ability to self-equalize and distribute the load
- Able to be divided into multiple safety systems
- Increased holding power and minimal soil disturbance due to anchor rod
- Allows easy attachment of additional holding support if required
SMC Large Steel Lock D Carabiner- NFPA
KEY FEATURES:
- Type: Screw Lock
- Mbs: 46 Kn (10341 Lbf)
- Weight: 6 Oz (300 G)
- Length: 04″ (12.8 Cm)
- Width: 97″ (7.5 Cm)
- Gate Opening: 20″ (30.5 Mm)
- Major Axis: 46 Kn (10341 Lbf)
- Minor Axis: 16 Kn (3600 Lbf)
- Gate Open: 11 Kn (2473 Lbf)
- Material: Zinc plated Steel
SMC Figure 8 W/Ears – NFPA (Black)
KEY FEATURES:
- Solid heat treated aluminum
- Hard-anodized finish
- Choose from grey or black
- Carabiner hole functions as a sticht plate for 1/2” rope
11mm PMI Classic Rope
Key Features:
- MBS: 28.5 kN (6407 lbf)
- Weight: 80 g/m
- Diameter: 11 mm (7/16″)
- Length: 30 m (100 ft)
- Elongation: 1.8% at 300 lbf | 3.7% at 600 lbf | 5.6% at 1000 lbf
- Elongation @ 10% MBS: 3.7%
- Knotability: 0.9
- Sheath Slippage: 0.1%
- Shrinkage: 3.2%
- Sheath Content: 50.4%
- Material: Nylon Sheath/Nylon Core
1″ Nylon Tubular Webbing
Key Features:
- MBS: 18 kN (4000 lbf)
- Weight: 36 g/yd
- Length: 92 m (300 ft)
- Width: 1.00″ (2.5 cm)
- Material: Nylon
North 5400 Full Face Respirator
Key Features:
- Provides protection against organic vapors
- Cartridges sold separately
- Oral nasal cup reduces fogging and lessens dead air space to improve worker comfort by limiting re-breathing of exhaled air
- Chin cup helps to position the facepiece properly
- Latex free Polycarbonate lens
- Can be adapted to PAPR or Supplied Air for multiple work environments
- Meets ANSI high impact requirement
- NIOSH approved (42 CFR 84 standards)
North 7700 Half Mask Respirator
KEY FEATURES:
- Silicone facepiece material conforms to facial features and doesn’t harden with age. Silicone is easy to clean, extremely durable and resists distortion ensuring a better fit, time after time.
- Contoured sealing flange and cradle suspension system eliminates discomfort caused by pressure points on facial nerves. Design of nose area provides excellent comfort and fit.
- Minimal dead air space improves worker comfort by limiting re-breathing of exhaled air.
- Direct cartridge to facepiece seal minimizes replacement parts and simplifies maintenance.
- Three overlapping sizes will comfortably fit most users.
- North 7700 Series Half Masks are compatible with all North cartridges, filters and accessories.
- Cartridges sold separately.
PMI 8mm Accessory Cord
Key Features:
MBS: 14.3 kN (3214 lbf)
Weight: 42.0 g/m
Diameter: 8 mm (5/16″)
Length: 50 m (164 ft)
Material: Nylon
Drager X-am 2500 Detector Kit (4 gas)
Daily: $70.00
Weekly: $315.00
Monthly: $1050.00
Tripod Kit w/winch
Daily: $80.00
Weekly: $360.00
Monthly: $1200.00
Pelsue Davit Arm System w/H-Base
Daily: $140.00
Weekly: $630.00
Monthly: $2100.00
Pelsue Davit Mast & Elbow
Daily: $60.00
Weekly: $270.00
Monthly: $900.00
Vehicle Hitch Mount
Daily: $60.00
Weekly: $270.00
Monthly: $900.00
3-Way Rescue Winch
Daily: $40.00
Weekly: $180.00
Monthly: $600.00
Pelsue Blower
Daily: $35.00
Weekly: $157.50
Monthly: $525.00
Allegro 12″ Blower
Daily: $45.00
Weekly: $220.50
Monthly: $675.00
60 Minute SCBA
Daily: $75.00
Weekly: $337.50
Monthly: $1125.00
Drager PSS Colt EBA
Daily: $45.00
Weekly: $202.50
Monthly: $675.00
Breathing Air Cart
Daily: $140.00
Weekly: $630.00
Monthly: $2100.00
EnviroSafety Lockout Kit
KIT INCLUDES:
• 1 Lockout Duffel Bag
• 1 Cable lockout
• 1 mini cable lockout
• 1 small universal valve lockout
• 1 adjustable gate valve lockout
• 1 small ball valve lockout
• 1 small gate valve lockout
• prinzing ball valve lockout
• 2 120V snap-on circuit breaker lockout
• 2 120/277V clamp on breaker lockout
• 2 universal multi-pole lockout
• 1 480/600V clamp-on lockout
• 1 oversized breaker lockout
• 1 small plug lockout
• 1 large plug lockout
• 1 pneumatic disconnect lockout
• 12 lockout hasps
• 2 nylon lockout hasps
• 25 cardstock lockout tags
• 6 laminated lockout tags
• 2 wall switch lockouts
• 1 lockout sign
Brady Gate Valve Lockout
KEY FEATURES:
- Injection- molded polypropylene
- Temperatures from -20‚°F to 300‚°F
- OS&Y pr ‘rising stem’ valves
- Accepts locks with shackles up to 3/6” diameter
- Available in S,M,L & XL
Brady Mini Cable Lockout
KEY FEATURES:
• Cable dimension of 1/ 16” outside diameter x 8’ length
• Extremely compact and portable
• Cable stored internally
Brady All Purpose Cable Lockout w/ 8′ Sheathed Cable
KEY FEATURES:
• Compact. Lightweight and ergonomic
• 4 lock holes
• Sheathed metal cable is 3/16″ diameter including vinyl coating
• Additional 8′, 12′, 16′ and 20′ cables are sold separately
Brady Universal Valve Lockout w/ Sheathed Cable & Blocking Arm
KEY FEATURES:
• Lightweight and easy to use
• Industrial grade steel and nylon
• Large device w/ 8” cable
• Open-ended clamp
Brady 120/277V Clamp-On Breaker Lockouts
KEY FEATURES:
•120/277v
•Accepts lock shackles up to 9/32″ in diameter
•Made of rugged polypropylene and impact modified nylon
Brady Universal Multi-Pole Breaker Lockout
KEY FEATURES:
• Durable glass filled nylon with stainless steel screw
• Device is compatible with most name-brand manufacturers, such as GE, ITE, Sylvania, Cutler-Hammer, Challenger, Bryant, Siemens, Square D and General Switch Company
Brady Ball Valve Lockout
KEY FEATURES:
• Easy to use
• Single piece design
• Hole diameter accepts 9/32″ padlock shackles
• For use on ball valve sizes from 0.25″ to 1″ (9/32″ lock holes)
Brady Prinzing Ball Valve Lockout
KEY FEATURES:
• Material – Polypropylene
• Outside pipe diameter – 2’’-8’’
Breather Box
Daily: $60.00
Weekly: $270.00
Monthly: $900.00
Drager PSS 3000 Harness
KEY FEATURES:
• Fire retardant and durable
• Simple assembly and disassembly
• Air Cylinder & Mask sold separately
Drager Panorama Nova Full Face Mask
KEY FEATURES:
• The personal breathing connection for highest demands for secure fit and comfort
• Mask body with double sealing frame for tight and comfortable fit. Inner mask with control valves
• Excellent field of vision through 180° panoramic window made of very flexible, impact and heat resistant polycarbonate, clamped in a robust stainless-steel frame
• No fogging due to optimum ventilation
• Proven stainless steel speech diaphragm for excellent speech understanding
Drager PSA EBA Colt Supplied Air Respirator
KEY FEATURES:
• Unique “drop down” cylinder feature can be easily clipped or unclipped from the waist belt for movement in tight spaces
• NIOSH-approved respirator can be used up to 300’ from an air source
• Harness is made of anti-static material that also resists chemicals and oil, and is impervious to acids and alkalies
• Flexible material is comfortable and easy to clean
• Regulator hose is easily separated from the harness for cleaning
• Harness buckles are easy to locate and adjust
• Available with a Panorama Nova full facepiece
Drager SCBA Cylinder (60 min 4500 PSI, Carbon Composite)
KEY FEATURES:
• SCBA cylinder with valve
• Pressure 4500 psi
• Duration 60 min
• Cylinder material carbon composite
• Weight Empty 17.9 lb
• For Use with Draeger SCBA
Large Multi-Pak Air Cart (4 outlets, 4500 PSI)
KEY FEATURES:
• 4500 psi
• 4 outlet aluminium block manifold
• 4 respirator couplings
• Safety release valve
• Adjustable regulator
Breather Box Filter Panel
KEY FEATURES:
• Visual Air Flow Meter to Monitor
• User Specified Respirator Couplings w/ Dust Caps
• Safety Relief Valve
• External Warning Lights and Alarm
• Remote Alarm Jack
• Carbon Monoxide Monitor CO/02 Optional
• Automatic Drains
• AC Power
• Incoming Air Plug 1/2” Industrial Interchange
• Filter Change Indicators
Personal Gas Monitor (4 gas)
Daily: $65.00
Weekly: $292.50
Monthly: $975.00
Drager PAC 5500 CO Monitor
Daily: $40.00
Weekly: $180.00
Monthly: $600.00
Drager PAC 7000 CO2 Monitor
Daily: $85.00
Weekly: $382.50
Monthly: $1275.00
Drager PAC 5550 H2S Monitor
Daily: $40.00
Weekly: $180.00
Monthly: $600.00
Litter Basket Stretcher
Daily: $50.00
Weekly: $225.00
Monthly: $750.00
Manhole Guard
Daily: $25.00
Weekly: $112.50
Monthly: $375.00
Contractor Harness – 1D – Class A – Pass-Thru Buckles
KEY FEATURES:
- Certified to both CSA Z259.10 and ANSI Z359 standards
- High visibility colour
- Fully adjustable for a universal fit
- 5 points of adjustment ensure a good fit (2 leg, 2 torso, 1 chest)
- Pass-Thru leg and chest buckles for quick donning
- Grommeted leg straps available
- Sub-pelvic strap for added safety and support
- Polyester webbing
- Fall indicator for easier inspection before use
- Large back D-ring for easy connection
- Available in a variety of classes: A, AP, AL, AE
- Meets or exceeds all applicable OSHA standards
- 400 lb (180 kg) capacity (combined weight of person, tools, clothing, etc.)
Pelsue 8″ Plastic Blower Kit with 15′ Hose
KEY FEATURES:
- Kit comes with 15′ hose
- 15lbs
- 921 CFM
- CSA, CEESI Certified
Pelsue Plastic 8’’ Blower
KEY FEATURES:
- 15 lbs
- 921 CFM
- CSA, CEESI Certified
Allegro Air Bag 12″ Blower with 15′ Ducting
KEY FEATURES:
- Lightweight, metal 12” (30.4cm) blower
- Super quiet
- Carry handle with molded-in 2-speed switch
- Steel/powder coated housing and grills
- Unique bag with openings for plug/cord, inlet and outlet
- Durable reinforced polyester bag
- Easy to carry and store
- All-in-one unit for ease of operation
- Duct mounted on the blower and stored inside bag
- Both carrying handle and shoulder strap allow for easy transportation
Allegro Industries Plastic Compaxial Blower
KEY FEATURES:
- 833 CFM
- 33lbs
- 15ft ducting & canister
Air Systems 8″ Economy Electric Blower Kit
KIT INCLUDES:
- Economy Centrifugal Blower
- Industrial Saddle Vent
- 90 Degree Elbow for Saddle Vent
- 15 Feet Ducting
- 6 Feet Ducting
- Duct Canister
- Universal Saddle Mount
Air Systems 8″ Standard Electric Blower Kit
KEY FEATURES:
- 3/4 HP, 115V AC 10.8 amp pre-wired, TEFC motor with installed GFI cord
- CSA and C/US approved and CE registered
- Free Air: 1,570 CFM
- 90° Bend: 1,047 CFM
Contractor Harness – 1D – Class A – Pass-Thru Chest Buckle – Grommeted Leg Straps
KEY FEATURES:
- Certified to both CSA Z259.10 and ANSI Z359 standards
- High visibility colour
- Fully adjustable for a universal fit
- 5 points of adjustment ensure a good fit (2 leg, 2 torso, 1 chest)
- Grommeted leg straps
- Sub-pelvic strap for added safety and support
- Polyester webbing
- Fall indicator for easier inspection before use
- Large back D-ring for easy connection
- Available in a variety of classes: A, AP, AL, AE
- Meets or exceeds all applicable OSHA standards
- 400 lb (180 kg) capacity (combined weight of person, tools, clothing, etc.)
Contractor Harness – 2D – Class AL – Pass-Thru Buckles
KEY FEATURES:
- Certified to both CSA Z259.10 and ANSI Z359 standards
- High visibility colour
- Fully adjustable for a universal fit
- 5 points of adjustment ensure a good fit (2 leg, 2 torso, 1 chest)
- Pass-Thru leg and chest buckles for quick donning
- Grommeted leg straps available
- Sub-pelvic strap for added safety and support
- Polyester webbing
- Fall indicator for easier inspection before use
- Large back D-ring for easy connection
- Available in a variety of classes: A, AP, AL, AE
- Meets or exceeds all applicable OSHA standards
- 400 lb (180 kg) capacity (combined weight of person, tools, clothing, etc.)
Contractor Harness – 3D – Class AE – Pass-Thru Buckles
KEY FEATURES:
- Certified to both CSA Z259.10 and ANSI Z359 standards
- High visibility colour
- Fully adjustable for a universal fit
- 5 points of adjustment ensure a good fit (2 leg, 2 torso, 1 chest)
- Pass-Thru leg and chest buckles for quick donning
- Grommeted leg straps available
- Sub-pelvic strap for added safety and support
- Polyester webbing
- Fall indicator for easier inspection before use
- Large back D-ring for easy connection
- Available in a variety of classes: A, AP, AL, AE
- Meets or exceeds all applicable OSHA standards
- 400 lb (180 kg) capacity (combined weight of person, tools, clothing, etc.)
Contractor Harness – 3D – Class AP – Pass-Thru Buckles
KEY FEATURES:
- Certified to both CSA Z259.10 and ANSI Z359 standards
- High visibility colour
- Fully adjustable for a universal fit
- 5 points of adjustment ensure a good fit (2 leg, 2 torso, 1 chest)
- Pass-Thru leg and chest buckles for quick donning
- Grommeted leg straps available
- Sub-pelvic strap for added safety and support
- Polyester webbing
- Fall indicator for easier inspection before use
- Large back D-ring for easy connection
- Available in a variety of classes: A, AP, AL, AE
- Meets or exceeds all applicable OSHA standards
- 400 lb (180 kg) capacity (combined weight of person, tools, clothing, etc.)
Contractor Harness – 3D – Class AP – Pass-Thru Chest Buckle – Grommetted Leg Straps
KEY FEATURES:
- Certified to both CSA Z259.10 and ANSI Z359 standards
- High visibility colour
- Fully adjustable for a universal fit
- 5 points of adjustment ensure a good fit (2 leg, 2 torso, 1 chest)
- Grommeted leg straps
- Sub-pelvic strap for added safety and support
- Polyester webbing
- Fall indicator for easier inspection before use
- Large back D-ring for easy connection
- Available in a variety of classes: A, AP, AL, AE
- Meets or exceeds all applicable OSHA standards
- 400 lb (180 kg) capacity (combined weight of person, tools, clothing, etc.)
PeakPro Harness – 1D – Class A – Stab Lock Buckles
KEY FEATURES:
- Certified to both CSA Z259.10 and ANSI Z359 standards
- High visibility colour
- Two-tone colour scheme for ease of donning
- Padded shoulder, back and leg straps for all-day comfort
- Fully adjustable for a universal fit
- 5 points of adjustment ensuring a good fit (2 leg, 2 torso, 1 chest)
- Stab Lock leg and chest buckles for quick donning
- Grommeted leg straps available
- Sub-pelvic strap for added safety and support
- Fall indicator for easier inspection before use
- Large back D-ring for easy connection
- Available in a variety of classes: A, AP, AL
- Meets or exceeds all applicable OSHA standards
- Polyester webbing
- 400 lb (180 kg) capacity (combined weight of person, tools, clothing, etc.)
PeakPro Harness – 2D – Class AL – Stab Lock Buckles
KEY FEATURES:
- Certified to both CSA Z259.10 and ANSI Z359 standards
- High visibility colour
- Two-tone colour scheme for ease of donning
- Padded shoulder, back and leg straps for all-day comfort
- Fully adjustable for a universal fit
- 5 points of adjustment ensuring a good fit (2 leg, 2 torso, 1 chest)
- Stab Lock leg and chest buckles for quick donning
- Grommeted leg straps available
- Sub-pelvic strap for added safety and support
- Fall indicator for easier inspection before use
- Large back D-ring for easy connection
- Available in a variety of classes: A, AP, AL
- Meets or exceeds all applicable OSHA standards
- Polyester webbing
- 400 lb (180 kg) capacity (combined weight of person, tools, clothing, etc.)
4′ Noryard Lanyard w/ Double Lock Snap Hook Ends
KEY FEATURES:
- 1/4″ Polyester Core
- 1″ Tubular Webbing
- Fall Indicator
- Integrated Shock Absorber
Noryard Lanyard w/ Loop & N314 Hook Ends
KEY FEATURES:
- 1/4″ Polyester Core
- 1″ Tubular Webbing
- Fall Indicator
- Integrated Shock Absorber
Noryard Lanyard w/ Snap Hook & N314 Hook Ends
KEY FEATURES:
- 1/4″ Polyester Core
- 1″ Tubular Webbing
- Fall Indicator
- Integrated Shock Absorber
E4 Shock Absorbing Lanyard – SP – Single Leg – Snap & ADP Rope Grab – 2′
KEY FEATURES:
- 2′ (0.6 m), single leg
- 1 snap hook, 1 ADP rope grab
- Maximum arrest force: 900 lbs (4 kN)
- Certified to CSA Z259.11-05 standards
- Made with a superior grade, heavy-duty 1-3/4″ (45 mm) or 1″ (25 mm) polyester webbing for maximum strength or 1/4″ (6 mm) galvanized plastic coated cable, with tear webbing shock absorber
- A tear-away absorber limits the arrest force to a maximum of 900 Ibs (4 kN) for the E4 category or 1,300 lbs (6 kN) for the E6 category
- PeakWorks SP lanyards are available in two categories: E4 (worker weight of 100 to 254 lbs [45 to 115 kg]) and E6 (worker weight of 200 to 386 lbs [90 to 175 kg)
E6 Shock Absorbing Lanyard – SP – Single Leg – Snap & Form Hooks – 4′ (1.2 M)
KEY FEATURES:
- 4′ (1.2 m), single leg
- 1 snap hook (body), 1 form hook (anchor)
- Maximum arrest force: 1,300 lbs (6 kN)
- Certified to CSA Z259.11-05 standards
- Made with a superior grade, heavy-duty 1-3/4″ (45 mm) or 1″ (25 mm) polyester webbing for maximum strength or 1/4″ (6 mm) galvanized plastic coated cable, with tear webbing shock absorber
- A tear-away absorber limits the arrest force to a maximum of 900 Ibs (4 kN) for the E4 category or 1,300 lbs (6 kN) for the E6 category
- PeakWorks SP lanyards are available in two categories: E4 (worker weight of 100 to 254 lbs [45 to 115 kg]) and E6 (worker weight of 200 to 386 lbs [90 to 175 kg])
E6 Shock Absorbing Lanyard- SP – Single Leg – Snap Hooks – 4′ (1.2 M)
KEY FEATURES:
- 4′ (1.2 m), single leg
- 2 snap hooks (1 body, 1 anchor)
- Maximum arrest force: 1,300 lbs (6 kN)
- Certified to CSA Z259.11-05 standards
- Made with a superior grade, heavy-duty 1-3/4″ (45 mm) or 1″ (25 mm) polyester webbing for maximum strength or 1/4″ (6 mm) galvanized plastic coated cable, with tear webbing shock absorber
- A tear-away absorber limits the arrest force to a maximum of 900 Ibs (4 kN) for the E4 category or 1,300 lbs (6 kN) for the E6 category
- PeakWorks SP lanyards are available in two categories: E4 (worker weight of 100 to 254 lbs [45 to 115 kg]) and E6 (worker weight of 200 to 386 lbs [90 to 175 kg])
Restraint Lanyard – 2 Snaps – 4′ (1.2 M)
KEY FEATURES:
- 4′ (1.2 metres)
- 2 snap hooks (1 body. 1 anchor)
Restraint Lanyard – 2 Snaps – 6′ (1.8 M)
KEY FEATURES:
- 6′ (1.8m)
- 2 snap hooks (1 body. 1 anchor)
Energy Absorber w/ D-Ring & N314 Snap Hook Ends 6′ (Orange)
KEY FEATURES:
- Easy to inspect
- Highly durable
- Compliant with CSA regulations
Chain Rebar Assembly
KEY FEATURES:
• 22” chain
• 2-snap hook ends
• 2.5” swivel rebar hook
• Certified to CSA 2259.11-05
Impacto Hard Shell Knee Pad
KEY FEATURES:
- The hinged-action shell bends with your knee
- Long term protection from cumulative trauma injuries
- Provides stability when working on your knees
- Made with 100% PVC materials
Lifeline Rope
KEY FEATURES:
• 5/8” co-polymer prosteel rope
• Available in 25, 50, 75, 100, 200ft
• Includes double locking snap hook end
• Abrasion, mildew and UV resistant
Norguard 10′ Web Self-Retracting Lifelines
KEY FEATURES:
- Ergonomic frame makes handling more comfortable
- Durable aluminum housing
- Dependable performance
- Stainless steel & non-corrosive components
- Quick-action braking system
- Meets or exceeds all OSHA, ANSI, & CSA standards
PMI Kevlar Advantage Helmet NFPA (Blue)
KEY FEATURES:
- Fully adjustable
- Three-point chinstrap
- Headlamp retainer
- Goggle mount
- Clips to attach earmuffs
SMC XL Steel Lock D Carabiner-NFPA
KEY FEATURES:
- Stainless steel gate and sleeve
SMC Micro (1 3/8″) PMP Single – NFPA (Red)
KEY FEATURES:
- Precision machined aluminum side plates and 1.38″ sheaves
- Sealed Ball Bearings
- Double pulleys include a becket
SMC Spider Auto-Braking Descender – NFPA
KEY FEATURES:
- SIZING INFO: 11 mm – 13 mm rope
- MBS: 13 kN (3174 lbf)
- WEIGHT: 1 lbs 3.8 oz (562 g)
- MAX ROPE SIZE: 5 mm
SMC Rigging Plate NFPA-Red
KEY FEATURES:
- Anodized aluminum
- Holes are numbered for quick identification
PMI Light Pod Helmet (Red)
KEY FEATURES:
- Three-point chinstrap
- Flash light POD
- Goggle mount
PMI Rope Tech Gloves
KEY FEATURES:
- Synthetic leather (palm base layer)
- Cowhide layer (finger wear points and palm)
- ergonomically shaped for maximum protection and durability
- Two-Way stretch spandex on top and fingers for greater mobility and breathability
- Elastic cuff with pull-tab and Velcro closure
- Carabiner loop stores inside for snag free operations
Rescue Pole – Telescoping 6-12′ (1.8-3.7 M) – Rescue Head Carabiner Attachment
KEY FEATURES:
- The pole is a strong yet lightweight fibreglass-constructed telescoping pole that reaches from 6 to 12′ (1.8 to 3.7 m)
- A lightweight bracket holds the carabiner open until the operator hooks onto the victim’s D-ring or anchor and pulls back. At that point, the carabiner is released from the head and snaps shut
- Designed for use with the CP-03015-1 carabiner (sold separately)
Restraint Lanyard – Snap & Form Hooks – 4′ (1.2 M)
KEY FEATURES:
- 4′ (1.2m)
- 1 snap hook (body), 1 form hook (anchor)
Restraint Lanyard – Snap & Form Hooks – 6′ (1.8 M)
KEY FEATURES:
- 6′ (1.8m)
- 1 snap hook (body), 1 form hook (anchor)
Rope Grab W/ 2′ Lanyard & Shock Absorber (Snap/Snap)
KEY FEATURES:
- ” Hands Free“ operation on weighted vertical safety line
- Double locking closing mechanism
- Hinge design permits attachment anywhere on lifeline
- Large ring for direct web attachment or snap hook connection
- Moves freely along 5/8″ rope on brass rollers
- All non-corrosive materials
- Stainless steel, brass & bronze
- Parts are tumbled and burnished to polished finish
- Certified to CSA Z259.11-05 and meets ANSI Z359.1
Safe-T Ladder Extension
KEY FEATURES:
• Designed to attach over the top of the ladder and provide a safe and easy transition from the ladder to a second surface
• Requires no tools, drilling or bolting to hold it securely in place
• The unit provides two offsetting handrails
Spreader Bar
KEY FEATURES:
- Excellent Rescue & Retrieval from confined spaces
- Two Self-Locking snap hooks connect to shoulder D-rings of worker’s harness
- Internal Fiber Glass bar maintains shoulder width spacing of snap hooks
- Large D-ring lifting eye
- All hardware is CSA certified to Z259.12
ES 7′ Tripod Kit
KIT INCLUDES:
- 7′ industrial aluminum tripod
- 3-way self-retracting lifeline (SRL) /rescue winch w/ 50′ x 3/16″ diameter stainless steel cable & mounting bracket
- Carabiner, oval double lock
- Pulley, stainless steel
- Optional add on quick-connect brackets
- Tripod carry bag
- Winch carry bag
Industrial 7′ Tripod
KEY FEATURES:
- Static load of 5,400 lbs
Industrial 9′ Tripod
KEY FEATURES:
- Static load of 5,400lbs
Pelsue Davit Arm System with H Base
KEY FEATURES:
- Rated for up to 350 lb worker
- Quick connect winch attachment bracket
- Capable of mounting 2 winches (Standard with 1 mounting bracket)
- Winch sold separately
- All aluminium construction
- Weighs less than 50 lbs
- Several base options are available (sold separately)
Pelsue Davit Arm System (no base)
KEY FEATURES:
- Rated for up to 350 lb worker
- Quick connect winch attachment bracket
- Capable of mounting 2 winches (winch not included)
- Winch sold separately
- All aluminium construction
- Weighs less than 50 lbs
- Several base options are available (sold separately)
Vehicle Hitch Mount Davit Arm Base
KEY FEATURES:
- Includes aluminum “T-Bar” stabilizer leg
- Designed for maximum 24” offset davit system
- Modular system offers many accessories to adapt hitch mount to your needs
- Sleeve includes ABS liner and PVC slip plate
Pelsue Lifeguard Rescue System
KEY FEATURES:
- Portable two-piece unit for easy set-up
- One-person setup – the upper assembly will support itself with only one attached to the lower assembly.
- Dual anchor points
- Complaint with fall arrest standards (OSHA 1926 & ANSI A10.14), and Confined Space Entry Standards (OSHA 1910.146 & ANSI Z117.1.)
- Usable with a hoist, winch, SRL, 3-way or a combination of devices to be suit your application
- Man rated load capacity: 350 lbs.*
- Overhead proof load: 5000 lbs.System complies with OSHA safety standards when used by a competent individual
- Winch sold separately
3-Way SRL / Rescue Winch (50′ & 100′)
KEY FEATURES:
- WORKING LOAD: 310 lbs
- CABLE DIAMETER: 3/16in
- LENGTH OF CABLE: 50ft
- WEIGHT: 47 lbs
- LOCKING SPEED: 4-5 ft./sec
- STOPPING DISTANCE: Less than 24in
50′ Personnel Winch (stainless steel cable)
Features two braking systems:
- Brake in case of freewheeling effect
- Friction brake system that engages during raising or lowering operations and allows to hold load in place
Davit Base Corner Mount
KEY FEATURES:
- Available in electroless nickel plated steel, zinc plated, galvanized or stainless steel
- ABS liners with PVC slip plates
- Accepts up to 48” offset masts
- Sleeve is always on site
- Inside sleeve diameter 3.0680”
- Liners and sleeves are replaceable
- Allows masts to pivot 360°
- Drain holes eliminate water buildup
- Friction bearing is replaceable
Davit Center Floor Mount Base
KEY FEATURES:
- Available in electroless nickel plated steel, zinc plated, galvanized or stainless steel
- ABS liners with PVC slip plates
- Accepts up to 48” offset masts
- Sleeve is always on site
- Inside sleeve diameter 3.0680”
- Liners and sleeves are replaceable
- Allows masts to pivot 360°
- Drain holes eliminate water buildup Friction bearing is replaceable
Davit Flush Floor Mount Base
KEY FEATURES:
- Available in electroless nickel plated steel, zinc plated, galvanized or stainless steel
- ABS liners with PVC slip plates
- Accepts up to 48” offset masts
- Sleeve is always on site
- Inside sleeve diameter 3.0680”
- Liners and sleeves are replaceable
- Allows masts to pivot 360°
- Drain holes eliminate water buildup
- Friction bearing is replaceable
Drager X-am 2500 4-Gas Detector Package A
COMPLETE PACKAGE INCLUDES:
- 4-gas detector
- NiMH rechargeable battery
- Charging cradle
- Calibration station
- 34AL cylinder of calibration gas
- Motorized pump
- 12’ of tubing
- 1520 pelican case
- Certificate of calibration
Drager X-am 2500 4-Gas Detector Package B
COMPLETE PACKAGE INCLUDES:
- 4-gas detector
- NiMH rechargeable battery
- Charging cradle
- Calibration cradle
- 34AL cylinder of calibration gas
- Motorized pump
- 12’ of tubing
- 1520 pelican case
- Certificate of calibration
Drager X-am® 2500 Gas Detector (4 Gas, Rechargeable)
KEY FEATURES:
- Long-lasting, reliable sensor technology
- Matrix display
- High capacity battery
- X-Dock compatibility
- Zone 0 approved
- Diffusion or pump
- Ergonomic and robust
- Peak value functionality
- IP 67 dirt and water resistance
Drager X-am® 5000 Gas Detector (1-5 Gas, Rechargeable)
KEY FEATURES:
- Ergonomic mobile phone design
- Flexible sensor exchange
- Durable sensor technology
- Poison- resistant ex sensor
- Robust and water tight
- External pump
- Area monitoring
- Optimum solutions for function or bump test and calibrations
- Flexible power supply
- IP 67 water and dust resistant
Drager X-am® 5600 Gas Detector (1-6 Gas, Rechargeable)
KEY FEATURES:
- Small yet robust
- Accurate measurement results
- Durable infrared technology
- Various monitoring possibilities
- Flexible use
- Suitable for X-Zone 0
- Area monitoring
- Reliable hydrogen detection
- IP 67 water and dust-proof
Drager Pac® 5500 CO Monitor (0-500 ppm)
KEY FEATURES:
- High performance Dräger XXS Sensors
- No lifetime limitation with simple battery, sensor and filter replacement
- 8-15 second function test with the Dräger Bump Test Station
- Optional calibration function after a failed function test
- Adjustable bump test interval
- Gas inflow from above and the front
- Optional high visibility labels for instrument recognition at a distance
Drager Pac® 7000 H2S Monitor (0-100 ppm)
KEY FEATURES:
- Event logger for up to 60 events
- Easy to replace batteries and sensors
- Replaceable dust and water filters
- Rapid functional tests on site
- Estimated sensor service life of 5 – 8 years
Drager Pac® 5500 O2 Monitor (0-25 %Vol)
KEY FEATURES:
- Accurate and easy to use
- No lifetime limitation
Drager Pac® 7000 CL2 monitor (0-20 ppm)
KEY FEATURES:
- Measuring range 0-50 PPM
- Resolution 0.05 PPM
- Lifetime monitor
- Easily replaced battery and sensor
- Constant readout of Cl2 level
- 2-year sensor warranty
- Durable housing
- IP 65 water resistance
Drager Pac® 7000 HCN Monitor (0-5% Vol)
KEY FEATURES:
- High performance Dräger XXS Sensors
- Automatic function test with Dräger Bump Test Station
- Optional calibration function after a failed function test
- Adjustable bump test interval
- Unlimited lifetime with simple battery, sensor and filter replacement
- Integrated data logger
- Gas inflow from above and the front
- IP 67 water and dirt resistance
Dräger Pac® 7000 NH3 Monitor (0-300ppm)
KEY FEATURES:
- Measuring range – 0-300 ppm
- Resolution 1 ppm
- 2-year sensor warranty
- Easily replaced battery and sensor
- Lightweight and durable
- IP 65 dirt and water resistance
Drager Pac® 7000 NO2 Monitor (0-50 ppm)
KEY FEATURES:
- Hard-wearing housing
- No fixed lifespan
- Easily replaced battery and sensor
- Measuring range 0-50 ppm
- Resolution 0.1 ppm
- IP 65 water resistance
Drager Pac® 7000 SO2 Monitor (0-100 PPM)
KEY FEATURES:
- Resolution 0.1 ppm
- Measuring range 0-100 ppm
- Lifetime monitor
- Battery and sensor field-replaceable
- Constant readout display of SO2 level
Drager X-am® Bump Test/Calibration station
KEY FEATURES:
- No electricity needed
- Cost-effective
- Works with X-am 2000, 2500, 5000, and 5600 models
- Compatible with standard 58L or 103L mixed gas cylinders
- Provides exceptionally fast calibrations and bump tests
- 600 bumps out of a 58L cylinder
Drager X-Dock 6300 (3 gas outlets)
KEY FEATURES:
- Reliable documentation in accordance with regulations
- Date-specific reporting on whether functional tests were carried out using the documentation/storage function
- Alarm documentation – evaluation of gas concentrations to which the gas detectors were exposed
- Continuous overview of the equipment status and condition with the X-dock Manager
- Simple system operation requires minimal user training
- Fast, parallel running tests translate into little preparatory work
- Safe, reliable system handling due to different access authorizations
Drager X-Zone® 5000 Area Monitoring System
KEY FEATURES:
- Innovative area monitoring
- Wireless fence line
- Alarm contact to connect to external equipment
- Continuous operation for up to 120 hours
- Piercing audible and attention getting visual alarms – 360°
- Area monitoring via diffusion or with a sampling pump
- Available for use in Ex-zone 0
Drager X-am® Motorized Sample Pump
KEY FEATURES:
- Hose length of up to 30 metres
Drager Hard Side Accuro Pump Kit
KEY FEATURES:
- Mobile spot measurement
- Functional bellows pump
- One-handed operation